Steel support piers on concrete pads installed under the edge of a raised home, with fresh soil along the trench

Manufactured Home Foundations

Mobile Home Leveling & Earthquake Bracing in Ridgecrest

Doors sticking, floors sloping, or worried about the next quake? Get connected with an independent, licensed contractor who works on manufactured homes.

  • Releveling, pier, and tie-down repair
  • State-certified earthquake bracing (ERBS)
  • Free referral, no obligation

Free referral service · No obligation

Foundation Repair Ridgecrest is a free referral service, not a contractor. We do not perform foundation repair work. We connect property owners with independent, licensed foundation repair contractors, who may pay us for referrals. How it works

Get Connected With a Foundation Repair Pro

Tell us what you are seeing. We will match you with an independent, licensed contractor serving your area.

Prefer to talk? Call (760) 371-8564

  • Free referral service
  • Independent, licensed contractors
  • No obligation to hire
  • Ridgecrest & Indian Wells Valley

Why Mobile Home Foundations Matter in Ridgecrest

Most manufactured homes rest on steel or concrete piers rather than a continuous foundation. Over time those piers can sink into soft soil, lean, or lose their shims, and the home drifts out of level. You notice it as doors that will not latch, cracks at drywall seams, windows that bind, or water pooling on one side of the roof.

Shaking is the bigger risk here. In the 2019 Ridgecrest earthquakes, state housing engineers documented about 35 mobile homes in Ridgecrest parks that shifted or fell off their supports. Post-earthquake studies found the homes most likely to fall were older ones with weak pier connections and no tie-downs or bracing. An Earthquake Resistant Bracing System (ERBS) is designed to keep a home from dropping off its supports if it shifts.

Gloved hands holding a ruler across a branching crack in a stucco wall

Common Manufactured Home Foundation Problems

Most problems start under the home, where nobody looks until something inside stops working.

Out of level

Sinking or loose piers let the home sag, which shows up as sticking doors, drywall cracks, and gaps at trim.

Damaged or leaning piers

Piers knocked out of plumb by shaking, or sitting on cracked pads, can fail in the next quake.

Missing or loose tie-downs

Anchors and straps resist wind and some movement. Many older homes have rusted or missing ones.

No earthquake bracing

Without an ERBS, a home that slides off its piers can drop several feet, damaging the floor, plumbing, and gas lines.

What Does Mobile Home Leveling or Bracing Cost?

Published cost guides put a typical releveling at about $450 to $900, depending on the number of sections, with triple-wides and homes needing new piers or pads costing more. Cal OES lists a state-certified ERBS at roughly $3,000 to $5,000 installed, before the HCD permit.

These are typical ranges, not quotes. A contractor will price your home after looking underneath it.

WorkTypical rangeNotes
Releveling (single or double section)$450–$900More if piers or pads need replacing
Releveling (triple section)$1,000+Depends on access and condition
Earthquake Resistant Bracing System$3,000–$5,000Must be HCD-certified; permit required

Typical ranges from published national cost guides, not quotes. Your price comes only from a contractor who has seen the property.

What affects the price

  • Number of sections and size of the home
  • Condition of existing piers, pads, and tie-downs
  • How far out of level the home is
  • Skirting removal and crawl space access
  • HCD permit for bracing, and park requirements

See typical costs for every repair type

Is Your Manufactured Home Out of Level?

Tell us about your home and we will connect you with an independent, licensed contractor who works on manufactured homes. Free, no obligation.

How Our Referral Service Works

We connect you with a contractor. The contractor does the work.

  1. Tell us what you need

    Call or send the form with what you are seeing and where the property is.

  2. We match you

    We pass your request to independent, licensed contractors who serve your area.

  3. Talk to the contractor

    The contractor contacts you, inspects the property, and gives you their own estimate.

  4. You decide

    Hiring is entirely your choice. Your agreement is with the contractor, not with us.

Before You Hire for Mobile Home Work

Ask for a certified system

In California an earthquake bracing system must be certified by HCD and installed under an HCD permit. Ask to see both.

Check the license

Look up the contractor at cslb.ca.gov and confirm they are licensed for this kind of work.

Check park rules

If you are in a park, ask management about any requirements before work starts.

Mobile Home Leveling & Earthquake Bracing FAQs

How do I know if my mobile home needs releveling?

Common signs are interior doors that swing or will not latch, cracks at drywall seams or around windows, floors that feel sloped, and gaps where walls meet ceilings. A contractor can check the home with a level and look at every pier underneath.

What is an ERBS?

An Earthquake Resistant Bracing System is a state-certified system installed under a manufactured home to limit how far it can drop if it shifts off its piers during shaking. California requires that systems be HCD-certified and installed under a permit.

How often should a mobile home be releveled?

There is no fixed schedule. Many owners have the level checked every few years, after a noticeable earthquake, or whenever doors start sticking. Homes on softer ground may need it more often.

Are there grants for mobile home earthquake bracing?

Programs change. The Earthquake Brace + Bolt grant is for older wood-frame houses with a raised foundation, not manufactured homes. Check the California Residential Mitigation Program website for current options before you budget around a grant.

Get Connected With a Mobile Home Foundation Contractor

Tell us about your property and we will connect you with an independent, licensed contractor in the Ridgecrest area. Our service is free.

  • We review your request
  • We pass it to up to 3 independent, licensed contractors serving your area
  • A contractor contacts you to discuss your property
  • Any inspection, estimate, and work are between you and the contractor

Most requests are passed to a contractor within one business day.

Call Now Find a Pro